ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 2959 > < Procedures|Page 2957
Page 1
background image

Powertrain Control Module: Removal and Replacement

With Automatic Transaxle

REMOVAL

CAUTION:  Electronic modules are sensitive to static electrical charges. If the modules are exposed to these charges, damage may result. 

1. Disconnect the battery ground cable.
2. Remove the parking brake and shift consoles.

3. Place the gearshift lever in LOW and remove the four transmission control selector dial bezel screws.

4. Turn the transmission control selector dial bezel one-quarter turn counterclockwise.

5. Loosen the bolt and disconnect the PCM electrical connector.

Procedures|Page 2959 > < Procedures|Page 2957