ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 2960 > < Procedures|Page 2958
Page 2
background image

6. Slide the Powertrain Control Module (PCM) straight out.

INSTALLATION

1. Follow the removal procedure in reverse order.

With Manual Transaxle

REMOVAL

CAUTION:  Electronic modules are sensitive to static electrical charges. If the modules are exposed to these charges, damage may result.

1. Disconnect the battery ground cable.
2. Remove the parking brake and shift consoles.

3. Remove the gearshift knob and boot.

Procedures|Page 2960 > < Procedures|Page 2958