Escort L4-122 2.0L SOHC VIN P SFI (1999)
Throttle Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet tube.
3. Disconnect the fuel charging wiring from the Throttle Position (TP) sensor.
4. Remove the throttle position sensor.
^
Remove the screws.
^
Remove the throttle position sensor.
INSTALLATION
2. Follow the removal procedure in reverse order.
CAUTION: Slide the rotary tangs of the TP sensor, rotated one-quarter turn clockwise away from their final installed position, into place over the
throttle shaft blade, and then rotate the TP sensor counterclockwise only to the installed position. Failure to install the TP sensor in this manner
may result in excessive idle speeds.
NOTE: The TP sensor is not adjustable.
