ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Ignition System > < Knock Sensor|Specifications|Page 3801
Page 1
background image

Knock Sensor: Service and Repair

REMOVAL

1. Disconnect the battery ground cable.

NOTE:  The Knock Sensor (KS) is located on the RH side of the cylinder block.

2. Raise the vehicle on a hoist.

3. Disconnect fuel charging wiring from the knock sensor.

4. Remove bolt and knock sensor from the cylinder block.

INSTALLATION

1. Follow the removal procedure in reverse order.

Sensors and Switches - Ignition System > < Knock Sensor|Specifications|Page 3801