Escort L4-122 2.0L SOHC VIN P SFI (1999)
-
Do not place the driver or passenger air bag module with the trim cover or deployment door facing down, as the forces of the deploying air bag
can cause it to ricochet and cause personal injury.
NOTE: The passenger air bag module is shown. The driver air bag module is similar.
1. Remove the passenger air bag module.
2. Cut the two connector wires on the passenger air bag module and strip 25 mm (1 inch) of insulation from the ends of the wires.
3. Obtain two wires at least 6.1 meters (20 feet) long and connect one end of each wire to each of the wires on the passenger air bag module.
4. Place the passenger air bag module on a flat surface with the deployment door facing upward in an open outdoor area.
5. Remain at least 6.1 meters (20 feet) away from the passenger air bag module.
6. Deploy the air bag by touching the other ends of the two wires to the terminals of a 12-volt battery.
