Escort L4-122 2.0L SOHC VIN P SFI (1999)
11. Use Safety Belt Bolt Bit to remove the rear safety belt retractor bolt and pull the rear safety belt tongue and anchor out of the passenger
compartment into the luggage compartment.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
-
Ensure that the plastic bezel located on the rear package tray is secure after installing the rear safety belt and that the rear safety belt does not
bind or catch on it.
-
Ensure that after the rear safety belt retractor is installed, the retractor is not stuck in the Automatic Locking Retractor (ALR) mode.
-
Perform the Function Test to ensure that the new retractor operates properly. See: Testing and Inspection/Component Tests and General
Diagnostics
Wagon
