Escort L4-122 2.0L SOHC VIN P SFI (1999)
Alignment: Service and Repair
Front
1. Loosen the LH and RH tie rod end jam nuts.
2. CAUTION: The LH and RH front wheel spindle tie rods are both RH threaded. To increase the toe-in, turn the RH front wheel spindle
tie rod toward the front of the vehicle and turn the LH front wheel spindle tie rod by the same amount toward the rear of the vehicle. One
turn of the front wheel spindle tie rod (both sides) makes a toe-in change of about 6mm (0.24 inch).
Turn the front wheel spindle tie rods equally until the toe-in setting is within specifications.
3. Tighten the tie rod end jam nuts.