ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Power Steering Line/Hose|Specifications|Page 5862 > < Power Steering Line/Hose|Specifications|Page 5860
Page 4
background image

15. Remove the screw from the middle power steering hose bracket and separate from the hoses.

16. Remove the power steering return hose retainer bracket bolt.

17. Loosen the clamp and disconnect the power steering return hose from the power steering pump reservoir.

18. NOTE:  After the removal of the power steering hoses it is necessary to remove and discard the O-ring seals.

Remove the hoses from the vehicle.

INSTALLATION 

1. NOTE:  Lubricate and install new O-ring seals where necessary before installation of the power steering hoses.

Position the hoses in the vehicle.

Power Steering Line/Hose|Specifications|Page 5862 > < Power Steering Line/Hose|Specifications|Page 5860