ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering Gear|Specifications|Page 5904 > < Steering Gear|Specifications|Page 5902
Page 4
background image

12. Remove the strap holding the hoses to the steering gear and discard.
13. On vehicles equipped with a manual transaxle, remove the nut and disconnect the transmission gearshift rod and clevis from the transaxle.
14. On vehicles equipped with a manual transaxle, remove the extension bar nut and disconnect the gearshift lever stabilizer bar and support from the

transaxle.

15. Remove the steering gear mounting brackets.

1. Remove the two nuts from each bracket.
2. Remove the steering gear mounting brackets.

16. Remove the (A) pushpin and position the (B) RH boot shield aside.
17. Remove the steering gear from the RH side of the vehicle.

18. Install the (A) steering gear into (B) Steering Gear Holding Fixture and Head Mounting Fixture.
19. Clean the exterior of the steering gear with solvent. If necessary, drain excess hydraulic fluid.
20. Check the fluid passages for obstructions and leaks.
21. Inspect the power steering gear housing for cracks or other damage. If necessary, replace the steering gear.

Steering Gear|Specifications|Page 5904 > < Steering Gear|Specifications|Page 5902