ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Rear Knuckle|Service and Repair|Page 5963 > < Front Steering Knuckle|Service and Repair|Page 5959
Page 1
background image

Rear Knuckle: Service and Repair

REMOVAL 

1. Remove the front disc brake rotor.

2. Carefully raise the staked portion of the front axle wheel hub retainer and remove the retainer.

3. Remove the (A) cotter pin and the (B) tie rod end nut from the tie rod end.

4. Use Tie Rod End Separator to separator the tie rod end from the front wheel knuckle.

5. On ABS equipped vehicle, remove the anti-lock brake system (ABS) sensor.

-

Remove the bolt.

-

Remove the sensor.

Rear Knuckle|Service and Repair|Page 5963 > < Front Steering Knuckle|Service and Repair|Page 5959