Escort L4-122 20L SOHC VIN P SFI - Automatic Transmission Mount | Technical Service Bulletin
5.
Remove the rear lower cross-member (attached with four (4) bolts (Figure 1)).
6.
Remove the engine support cross-member that runs from front to rear of the engine (Belly Band). This can be accomplished by removing the front
two (2) attaching bolts, the rear two (2) attaching nuts and the four (4) Engine Mount # 1 and # 2 nuts (Figure 1).
NOTE
DISCARD THE TWO ENGINE MOUNT # 1 FLAT WASHERS FOR VEHICLES BUILT PRIOR TO 12/03/2001 ONLY.