Escort L4-122 2.0L SOHC VIN P SFI (1999)
6. Remove any excess grease on the mating surfaces and slide the front wheel driveshaft joint boot forward onto the driveshaft joint.
7. Remove any excess air trapped in the front wheel driveshaft joint boot using a cloth covered screwdriver after adjusting the front wheel driveshaft
joint boot spacing.
8. Use Boot Clamp Pliers to install two new front wheel driveshaft joint boot clamps.
9. Use Sensing Ring Replacer to install a new front brake anti-lock sensor indicator.
10. Install the front wheel driveshaft and joint.