ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Hub End-Play|Page 4546 > < Comprehensive Noise/Vibration/Harshness Procedure|Page 4543
Page 1
background image

Wheel Bearing: Testing and Inspection
Hub End-Play

Front

Special Tools

1. On rear drum brake equipped vehicles, remove the front disc brake rotor.
2. Position Dial Indicator Bracketry and Dial Indicator against the wheel hub.
3. Push and pull the wheel hub by hand in an axial direction and measure the end play.
4. If the end play exceeds specification, check the wheel hub retainer torque specification and tighten if necessary. If necessary, replace the wheel

hub.

Rear

Special Tools

1. Remove the brake drum.
2. On rear disc brake equipped vehicles, remove the rear disc brake rotor.
3. Position Dial Indicator Bracketry and Dial Indicator against the wheel hub.
4. Push and pull the wheel hub by hand in an axial direction and measure the end play.
5. If the end play exceeds specification, check the wheel hub retainer torque specification and tighten if necessary. If necessary, replace the wheel

hub.

Hub End-Play|Page 4546 > < Comprehensive Noise/Vibration/Harshness Procedure|Page 4543