Escort L4-122 2.0L SOHC VIN P SFI (1999)
Flex Plate: Component Tests and General Diagnostics
1. Use a fine grade sandpaper (400 grit) for polishing or if necessary, machine the flywheel surface to remove any defects.
2. After resurfacing, the flywheel must be within specification:
^
the (1) surface runout must not exceed specification.
^
the (2) surface finish must be within specification.
^
the major diameter of any (3) dowel pin must be below the new flywheel surface.
^
the (4) bolts must screw into the flywheel by hand to within specification of the new flywheel surface.
