ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Lower, Front|Page 4879 > < Lower, Front|Page 4877
Page 2
background image

5. Note:  Disconnect the A/C line from the retainer located on the front of the engine crossmember.

Remove the engine crossmember.
1. Remove the bolts and nuts.
2. Remove the lower front insulator nuts.
3. Remove the lower rear insulator nuts.
4. Remove the engine support crossmember.

6. Lower the vehicle.

7. Partially lower the rear of the engine to gain access to the lower rear insulator bolt.

-

Loosen the nuts on Three-Bar Engine Support.

8. Raise the vehicle.

9. Remove the lower rear support insulator.

1. Remove the nut and the bolt.
2. Remove the lower rear support Insulator.

Installation

Lower, Front|Page 4879 > < Lower, Front|Page 4877