Escort L4-122 2.0L SOHC VIN P SFI (1999)
6. Trim the remaining urethane on the pinch weld to the specified thickness.
-
Use the supplied wool applicator to apply Urethane Metal Primer meeting Ford specification WSB-M2G234-C to any exposed metal on the
pinch weld.
-
If reusing the back window glass, remove all old urethane sealant with a clean, new razor blade.
INSTALLATION
1. Dry set the back window glass.
-
Position the back window glass in the pinch weld.
-
Align the back window glass from the bottom center point of the glass out to the two spacers at the bottom of the pinch weld.
-
Align the gap of the back window glass at the top and sides of the back window glass edge to the pinch weld edge.
-
Mark the back window glass and the body when aligned as specified.
-
Remove the back window glass from the pinch weld and clean the inside of the back window glass with an alcohol-free cleaner and wipe the
edge of the glass with a clean cloth.
NOTE: Keep glass and body surfaces free of dirt, water, and oil. Do not touch coated surfaces with your hands.
