Escort L4-122 2.0L SOHC VIN P SFI (1999)
2. Install the (A) back window glass moulding on the (B) back window glass perimeter.
3. Apply Urethane Glass Prep meeting Ford specification WSB-M5B280-C as shown, and repeat the application.
-
Apply Urethane Glass Prep to the back window glass directly inside the back window glass moulding on the blackout ceramic coating.
-
Immediately wipe off Urethane Glass Prep.
-
Repeat Urethane Glass Prep application.
NOTE: Immediately wipe off the urethane glass prep after application because it flash dries.
4.
Apply Urethane Glass Primer meeting Ford specification WSB-M2G314-B as shown.
-
Apply Urethane Glass Primer around the entire outer edge of the inside of the back window glass directly inside the back window glass
moulding.
-
Allow ten minutes drying time.
CAUTION:
-
If primer gets on your hands, remove it immediately.
-
Do not apply the urethane glass primer inside of the blackout ceramic coating. The primer will permanently discolor the back window glass.
