Escort L4-122 2.0L SOHC VIN P SFI (1999)
5. Cut the nozzle of the urethane sealant canister to specification.
6. Apply a bead of Urethane Adhesive around the pinch weld on top of the remaining bead of urethane.
-
Ensure that the bead of Urethane Adhesive is smooth and even. If necessary, reshape the bead with a suitable tool, using care not to trap air in
the bead.
CAUTION:
-
Use only urethane adhesive meeting ford specification WSB-M2G316-B to repair water and air leaks in the urethane adhesive.
-
After replacing the urethane installed glass, the vehicle should not be driven until the urethane has cured. the curing time at 21°C (70°F) and
50% relative humidity is 24 hours (decreasing at higher temperatures and higher humidities). Refer to the detailed instructions provided by the
manufacturer in the kit. Inadequate curing of the urethane may adversely affect the strength of the urethane adhesive bond.
NOTE: Ensure that Urethane Metal Primer is clean and dry.
