Escort L4-122 2.0L SOHC VIN P SFI (1999)
CAUTION:
^
Use only urethane adhesive meeting ford specification WSB-M2G316-B to repair water and air leaks in the urethane sealant.
^
After replacing the urethane installed glass, the vehicle should not be driven until the urethane has cured. The curing time at 21°C (70°F) and
50% relative humidity is 24 hours (decreasing at higher temperatures and higher humidities). Refer to the detailed instructions provided by the
manufacturer in the kit. Inadequate curing of the urethane may adversely affect the strength of the urethane adhesive bond.
7. Reshape the (A) bead of Urethane Adhesive.
8. Install the windshield outside moulding.
1
Align the marks on the windshield outside moulding.
2
Install the top portion of the windshield outside moulding.
3
Install the corners of the windshield outside moulding.
4
Install the sides of the windshield outside moulding from the top down.
9. Check for water leaks; if any leaks are found, repeat the procedure.
