ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Hard Start/No Start/Runs Rough|Page 7354 > < Engine - Hard Start/No Start/Runs Rough|Page 7352
Page 2
background image

3.

Install one (1) foam gasket (E8FZ-58224A26-A) around each door handle, Figure 2.

4.

Reinstall rear door arm rest pad.

5.

Reinstall front door arm rest base and arm rest pad.

PART NUMBER

PART NAME

CLASS

E8FZ-58224A26-A

Foam Gasket

B

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION: 880503A
TIME:

0.3 Hr. - Two door models 0.4 Hr. - Four door models DLR. CODING: Basic Part No. 7021818
Code:

35

Technical Service Bulletin # 8853

Date: 880302

Front/Rear Door Handles - Air Drafts

HANDLE - DOOR INTERIOR - LEAKS AIR - VEHICLES BUILT BEFORE 11/02/87

^

LEAK - AIR - DOOR INSIDE HANDLES - VEHICLES BUILT BEFORE 11/02/87

Article No.88-5-3

FORD:

1981-88 ESCORT 
1982-88 EXP

LINCOLN-MERCURY: 1981-87 LYNX 

1982-83 LN7

ISSUE:

An air draft may enter the passenger compartment through the front and rear door handles when the windows are fully or partly open. When
the windows are open a vacuum develops inside the passenger compartment that pulls air through the door handles. The affected units are all
except base series vehicles.

ACTION:

To correct this, install a foam gasket around all the door handles to improve sealing quality. Refer to the following service procedure.

1.

Remove front door arm rest pad and arm rest base.

2.

Remove rear door arm rest pad on four (4) door models.

Engine - Hard Start/No Start/Runs Rough|Page 7354 > < Engine - Hard Start/No Start/Runs Rough|Page 7352