Escort L4-98 1.6L SOHC VIN 5 FI (1985)
Brake Drum: Testing and Inspection
Type 3 Drum Brakes
1.
Inspect components for damage and unusual wear. Replace as necessary.
2.
Inspect wheel cylinders. Boots which are torn, cut or heat damaged indicate need for wheel cylinder replacement. Peel back lower edge of boot. If
fluid spills out, cup leakage is indicated and wheel cylinder should be replaced. A slight amount of fluid is always present and is considered
normal, acting as a lubricant for the cylinder pistons.
3.
Inspect backing plate attaching bolts and ensure they are tight.
4.
Using fine emery cloth or other suitable abrasive, clean rust and dirt from shoe contact surfaces on backing plate.
