ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Curb Idle Speed|Page 1165 > < Recall 89V095000: Engine Oil Leaks Onto Hot Exhaust|Page 1162
Page 1
background image

Idle Speed: Adjustments
Curb Idle Speed

Fig. 1 Curb idle speed adjust. 4-97.6 w/740 carburetor.

Fig. 2 Curb idle speed adjust. 4-97.6 less EFI & W/idle speed control

4-97.6 LESS EFI

NOTE: Refer to Tune Up Specifications chart for curb and fast idle speeds.

1.

Place transmission into Neutral or Park.

2.

Start and allow engine to reach normal operating temperature.

3.

On models with vacuum operated throttle modulator (VTOM), proceed as follows:
a. Position A/C heat selector in heat and blower switch on high.
b. Disconnect vacuum hose from VOTM, then plug.
c. Install slave vacuum hose from intake manifold vacuum to VOTM.

4.

Disconnect and plug vacuum hose from thermactor air control valve bypass.

5.

Install a suitable tachometer onto engine as per manufacturer's instructions.

6.

On models with VTOM, run engine until cooling fan comes on.

Curb Idle Speed|Page 1165 > < Recall 89V095000: Engine Oil Leaks Onto Hot Exhaust|Page 1162