Escort L4-98 1.6L SOHC VIN 5 FI (1985)
Wheel Fastener: All Technical Service Bulletins
Wheel Stud - Removal Procedure
Article No. 86-11-19
WHEEL STUD REMOVAL - SERVICE PROCEDURE
FORD 1986 and PRIOR ESCORT, EXP, TEMPO, MUSTANG, FORD, THUNDERBIRD, LTD; 1986 TAURUS
LINCOLN-MERCURY 1982-83 LN7; 1986 and PRIOR LYNX, TOPAZ, CAPRI, MERCURY, COUGAR, MARQUIS, LINCOLN, MARK; 1986
SABLE
LIGHT TRUCK 1986 and PRIOR E SERIES, F SERIES, BRONCO, RANGER, BRONCO II; 1986 AEROSTAR
The following procedures should be used when removing and installing wheel studs on front hub, front wheel drive vehicles (except Fiesta) and rear hub,
rear wheel drive passenger cars and light trucks equipped with Ford design rear axles, full floating and semi-floating including rear disc brake
applications.
FRONT WHEEL DRIVE - REMOVE AND INSTALL WHEEL STUD
Remove Wheel Stud
1.
Raise vehicle on hoist.
2.
Remove wheel and tire assembly.
3.
Remove caliper and rotor.
CAUTION:
NEVER REMOVE STUD WITH HAMMER AS DAMAGE TO THE HUB/BEARING MAY RESULT.
Figure 8
4.
Using tool T74P-3044-A1, press stud from its seat in the hub (Figure 8).
5.
Remove tool and pull stud out of hub.
