Escort L4-98 1.6L SOHC VIN 5 FI (1985)
FIGURE 14
3.
Eliminate the slightly raised burr on the intake manifold (Reference: Figure 14) by lightly and carefully tapping it down with the rounded end of a
ball peen hammer.
CAUTION: Do not allow foreign material to drop into the intake manifold; and do not hammer hard enough to dent the manifold, causing a
vacuum leak.
4.Install the new EFE heater spacer, and reinstall the carburetor to the vehicle.
5.
Start the engine and check for fuel leaks.
6.
Shut the engine off, and reinstall the cleaner assembly.
FIGURE 15
7.
Splice the new fuse link into the electrical system as shown in Figure 15, with the eyelet connected to the starter relay terminal. For installation
procedures, refer to the 1984 Shop Manual, Volume C, pages 34-30-3 and 4.
