ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Distributor Stator - Replacement Procedure|Page 955 > < Distributor Stator - Replacement Procedure|Page 953
Page 5
background image

This article is being republished to revise Test 5.

The above concerns can be caused by the distributor Hall Effect sensor. When the above concerns occur only at cold temperatures and the engine starts
and runs satisfactorily when warm, use the first diagnostic procedure. If the concern is no start, use the second procedure.

If a T.F.I. is removed from the distributor and the stator connector is soft or mushy, replace the stator.

OTHER APPLICABLE ARTICLES: NONE 
WARRANTY STATUS: "INFORMATION ONLY"

TFI Module Side of the SPOUT Connector

Distributor Stator - Replacement Procedure|Page 955 > < Distributor Stator - Replacement Procedure|Page 953