ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Ignition Coil - Possible Damage From Antitheft Devices|Page 6549 > < Ignition Coil - Possible Damage From Antitheft Devices|Page 6543
Page 1
background image

Ignition Ballast Resistor: All Technical Service Bulletins
Ignition Coil - Possible Damage From Antitheft Devices

Article No. 85-13-9

IGNITION COIL - POSSIBLE DAMAGE FROM ANTI-THEFT DEVICES

FORD 1982-85 ESCORT, MUSTANG, THUNDERBIRD, CROWN VICTORIA, 1983-85 LTD, 1984-85 TEMPO

LINCOLN-MERCURY 1982-85 LYNX, CAPRI, COUGAR, GRAND MARQUIS, CONTINENTAL, LINCOLN TOWN CAR, 1983-85 MARQUIS,
1984-85 TOPAZ, MARK VII

LIGHT TRUCK T.B.D.

CALIBRATIONS: All With T.F.I. (Thick Film Ignition)

WARNING:

This modification is authorized only for the listed engines. Performing this modification on other engine calibrations is unauthorized and
could create liability under applicable federal or local laws.

Figure 5 - Wiring Information - Ignition Coil

When installing an anti-theft device that grounds the negative side of the ignition coil, a ballast resistance wire (D7AZ-12250-A) must be installed
between the coil and grounding device as shown in Figure 5. This will prevent damage to the coil without interfering with the function of the grounding
device. Failure to do this on a TFI ignition system may result in damage to the ignition coil due to the large current flow (20 amps) which results.
PART NUMBER

PART NAME

CLASS

D7AZ-12250-A

Ballast Resistor

BCC

Ignition Coil - Possible Damage From Antitheft Devices|Page 6549 > < Ignition Coil - Possible Damage From Antitheft Devices|Page 6543