ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Differential - Revised Removal Procedure|Page 5816 > < Differential - Revised Removal Procedure|Page 5814
Page 14
background image

Figure 35

13.

Refer to Figure 35.

Position the brake hose routing clip on the suspension strut and install the attaching bolt.

Tighten the bolt to 11 N-m (8 ft.lbs.)

Figure 36

14.

Refer to Figure 36.

Reassemble the steering gear tie rod to the steering knuckle using a new nut and cotter pin.

Repeat this step on the remaining side.

Differential - Revised Removal Procedure|Page 5816 > < Differential - Revised Removal Procedure|Page 5814