Escort L4-98 1.6L SOHC VIN 5 FI (1985)
Installing Shim Selector Tool Over Differential Bearing Cup
d. Position bearing cup removed from transaxle case onto differential bearing, then install shim selector tool T81P-4451B or equivalent over
differential bearing cup.
e. Position transaxle case onto height gauge spacers. Install four bolts supplied with tool and torque bolts to 17-21 ft lbs (23-28 Nm).
Positioning Gauge Bar Tool Across Shim Selector Tool
f. Position gauge bar tool T80L-77003A or equivalent across shim selector tool.
Differential Selective Shim Chart
g. Using feeler gauge, measure gap between gauge bar and selector tool gauge surface. Obtain measurements from two positions around tool and
