Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
2. Disconnect the connector from the water temperature indicator sender unit.
3. Remove the water temperature indicator sender unit.
Installation
1. To install, reverse the removal procedure.
2. Tighten the water temperature indicator sender unit.
3. Fill the cooling system with only Ford Premium Engine Coolant System Fluid E2FZ-19549-AA (in Oregon, F5FZ-19549-CC, in Canada,
Motorcraft CXC-8-B) or equivalent meeting Ford specification ESE-M971344-A in a 50150 mixture with water.
4. Start the engine and check all hoses and connections for leaks. Allow the engine to warm up so that the water thermostat opens.
5. Stop the engine. Top off the coolant recovery reservoir as necessary to maintain minimum cold fill level.
