Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
8. Tighten the rear disc caliper bleeder screw.
9. Continue bleeding the rest of the system, going in order from the LH rear wheel, to the RH front wheel, ending with the LH front wheel.
10. Fill the brake master cylinder reservoir and install the reservoir cap.
-
Use High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification ESA-M6C25-A, DOT 3.
Brake System Pressure Bleeding
1. Clean the outside of the brake master cylinder reservoir.
2. Remove the reservoir cap and fill the brake master cylinder reservoir with brake fluid.
-
Use High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification ESA-M6C25-A, DOT 3.
3. Note: Master cylinder pressure bleeder adapter tools are available from various manufacturers of pressure bleeding equipment. Follow the
instructions of the manufacturer when installing the adapter.
Install Brake Bleeder to the brake master cylinder reservoir, and attach the Brake Bleeder tank hose to the fitting on the adapter.
