Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
1. Attach a rubber drain hose to the wheel cylinder bleeder screw and submerge the free end of the hose in a container partially filled with clean
brake fluid.
2. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.
3. CAUTION: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
Loosen the wheel cylinder bleeder screw until a stream of brake fluid comes out. Have an assistant maintain pressure on the brake pedal while
tightening the wheel cylinder bleeder screw.
-
Repeat until clear, bubble-free fluid flows.
4. Tighten wheel cylinder bleeder screw.
Rear Disc Brake Caliper Only (Mexico Only)
1. Attach a rubber drain hose to the rear disc brake caliper bleeder screw and submerge the free end of the hose in a container partially filled with
clean brake fluid.
2. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.