Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
6. Slide the PCM straight out.
NOTE: Make sure the anti-rattle clips are correctly aligned when installing.
INSTALLATION
1. To install, reverse the removal procedure.
Manual Transaxle
REMOVAL
CAUTION: Electronic modules are sensitive to static electrical charges. If the modules are exposed to these charges, damage may result. Refer to
Module Communications Network (Information Bus) for module service precautions.
NOTE: Zetec shown, S/R series similar.
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the parking brake and shift consoles. For additional information, refer to Console.
3. Remove the gearshift knob and boot.
4. Loosen the bolt and disconnect the electrical connector.
