Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Leak Detection Valve: Service and Repair
Canister Vent Solenoid
REMOVAL
1. Remove the Evaporative Emission (EVAP) canister. For additional information, refer to Evaporative Emission Control Canister.
2. Remove the canister vent solenoid.
INSTALLATION
1. To install, reverse the removal procedure.
^
Carry out the evaporative emission system leak test. For additional information, refer to Evaporative Emission System Leak Test. See: Testing
and Inspection/Component Tests and General Diagnostics
^
Carry out the evaporative emission repair verification drive cycle. For additional information, refer to Evaporative Emission Repair
Verification Drive Cycle. See: Service and Repair
NOTE: Lubricate the O-ring seal with MERPOL(R) O-Ring Seal Lubricant or equivalent meeting Ford specification ESE-M99B144B.
