Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Liquid Vapor Separator: Service and Repair
REMOVAL
1. Remove the fuel tank. For additional information, refer to Fuel Delivery and Air Induction.
2. Remove the fuel vapor valve assembly.
Alternating from side to side, gently lever the valve out. Grasp the valve firmly and apply upward pressure.
CAUTION: The fuel vapor vent valves are repaired as an assembly only. Care should be taken upon removal. Do not pull on the stub pipe of the
valve. Only pull or pry on the body or the flange. Failure to do so can cause damage to the evaporative emission valve assembly or the fuel tank.
INSTALLATION
1. Install the fuel vapor valve assembly rubber grommets in the fuel tank.
2. Install the fuel vapor valve assembly.
3. Install the fuel tank. For additional information, refer to Fuel Delivery and Air Induction.
^
Carry out the evaporative emission system leak test. For additional information, refer to Evaporative Emission System Leak Test. See: Testing
and Inspection/Component Tests and General Diagnostics
^
Carry out the evaporative emission repair verification drive cycle. For additional information, refer to Evaporative Emission Repair
Verification Drive Cycle. See: Service and Repair
