ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Compressor Cut-Off/Cycling Switch|Page 1105 > < A/C Cycling Switch|Page 1102
Page 1
background image

Refrigerant Pressure Sensor / Switch: Service and Repair
Compressor Cut-Off/Cycling Switch

REMOVAL

1. Remove the screws and reposition the power steering pump reservoir.

2. Disconnect the A/C cycling switch electrical connector.

3. Remove the A/C cycling switch from the top of the suction accumulator/drier.

INSTALLATION

1. To install, reverse the removal procedure.

-

Lubricate the O-ring seals with PAG Compressor Oil YN-12-C or equivalent meeting Ford specification WSH-M1C231-B.

Compressor Cut-Off/Cycling Switch|Page 1105 > < A/C Cycling Switch|Page 1102