Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Crankshaft Position Sensor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Raise the vehicle; refer to Maintenance/Service and Repair.
3. Remove the exhaust manifold; refer to Engine.
4. Disconnect the electrical connector from the Crankshaft Position sensor (CKP sensor).
5. Remove the crankshaft position sensor.
^
Remove the bolt.
^
Remove the crankshaft position sensor.
INSTALLATION
1. Lubricate the O-ring lightly with engine oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G and the API Certification
Mark.
NOTE: Inspect the O-ring for damage; replace if required.
2. Follow the removal procedure in reverse order.
