ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Generator Testing|Page 5441 > < Generator Testing|Page 5439
Page 1
background image

Alternator: Service and Repair

REMOVAL

1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the drive belt. Refer to Drive Belts, Mounts, Brackets and Accessories.
3. Remove the coolant tank reservoir. Refer to Cooling System.

4. Disconnect the two electrical connectors.

5. Remove the generator bolts and position the generator (GEN) aside.

6. Remove the generator.

1

Remove the battery power nut and washer.

2

Disconnect the battery positive cable and remove the generator.

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

INSTALLATION

Generator Testing|Page 5441 > < Generator Testing|Page 5439