Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Axle Shaft: Service and Repair
Halfshaft - Dynamic Damper
Removal
1. Remove the RH front drive halfshaft.
2. Disassemble outboard joint.
3. Note: This procedure is required only if it is being replaced on the RH halfshaft.
Remove and discard the dynamic damper retaining clamp and remove the dynamic damper.
Installation
1. Note: Position the dynamic damper to specifications from the outboard driveshaft joint using a new retaining band to hold it in place.
To install reverse the removal procedure.
