Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
Transmission Mount: Service and Repair
Support Insulator - Lower, Front
Special Tools
Removal
1. Note: 2.0L Zetec shown; 2.0L SPI similar.
Install Three-Bar Engine Support.
2. Raise and support the vehicle.
3. Remove the splash shield bolts from the engine support crossmember.
4. Remove the bolts and the crossmember.
5. Note: Disconnect the A/C line from the retainer located on the front of the engine crossmember.
