Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
5. Install the (A) back window glass moulding on the (B) back window glass perimeter.
6. Apply Urethane Glass Prep Essex U-401 meeting Ford specification WSB-M2G314-B as shown, and repeat the application.
^
Apply Urethane Glass Prep to the back window glass directly inside the back window glass moulding on the blackout ceramic coating.
^
Immediately wipe off Urethane Glass Prep.
^
Repeat Urethane Glass Prep application.
NOTE: Immediately wipe off the urethane glass prep after each application because it flash dries.
7. Apply Urethane Glass Primer Essex U-402 meeting Ford specification WSB-M5B280-C to the same area in the previous step.
^
Allow five minutes drying time.
8. Cut the nozzle of the urethane sealant canister to specification.
9. Apply a bead of Urethane Sealant Essex 400-HV or Essex U-216, which meets Ford Specification WSB-M20316-B around the pinch weld on top
of the remaining bead of urethane.
^
Make sure that the bead of Urethane Sealant is smooth and even. If necessary, reshape the bead with a suitable tool, using care not to trap air in
the bead.
CAUTION: If the vehicle is to be driven within 24 hours of urethane sealant application, Urethane Sealant Essex U-216 meeting Ford
specification WSB-M2G316-B must be used due to its one hour cure time.
