Escort ZX2 L4-2.0L DOHC VIN 3 (2000)
4. Install Norton Foam Seal ants 565 Black Foam Tape or equivalent meeting Ford specification ESB-M3G77-A.
5. If installing the original windshield glass, remove any excess Urethane Sealant.
6. Apply Urethane Glass Prep Essex U-401 meeting Ford specification WSB-M2G314-B and repeat the application.
^
Apply Urethane Glass Prep Essex U-401 meeting Ford specification WSB-M2G314-B to the windshield glass directly inside the blackout
ceramic coating.
^
Immediately wipe off the Urethane Glass Prep.
^
Repeat the Urethane Glass Prep application.
NOTE: Immediately wipe off the Urethane Glass Prep after application because it flash dries.
7. Use the supplied wool applicator to apply Urethane Glass Primer Essex U-402 meeting Ford specification WSB-M5B280-C to the same area in
the previous step.
^
Allow five minutes drying time.
8. Cut the nozzle of the Urethane Sealant canister to specification.
9. Install the windshield outside moulding around the top and sides of the windshield glass then tape to hold in place.
1
Align the marks on the windshield outside moulding.
2
Install the top portion of the windshield outside moulding.
3
Install the corners of the windshield outside moulding.
4
Install the sides of the windshield outside moulding from the top down.
