Excursion 2WD V10-6.8L VIN S (2001)
3. NOTE: Use the Traction-Lok Clutch Gauge Mandrel for the procedure.
Clamp the bolt head of the Traction-Lok Clutch Gauge in a vise.
^
Install the differential clutch pack and the differential side gear (without the shim or the Belleville spring) on the gauge.
4. Position the Traction-Lok Clutch Gauge disc on top of the differential clutch pack.
5. Install the Traction-Lok Clutch Gauge housing over the disc and tighten the nut.
6. Use a feeler gauge and select the thickest blade that will enter between the tool and the differential clutch pack.
^
The reading will be the thickness of the new clutch shim.
^
Select the correct shim size, and remove the Traction-Lok Clutch Gauge.