Excursion 2WD V10-6.8L VIN Z CNG (2003)
Balance Shaft: Specifications
Balance Shaft System
Balance Shaft Journal Diameter ......................................................................................................................................................... 26.962 - 26.936 mm
Clearance - Balance Shaft Journal to Cylinder Head ............................................................................................................................. 0.076 - 0.025 mm
Cylinder Head B/S Journal Diameter ................................................................................................................................................. 27.012 - 26.987 mm
Gear Backlash .................................................................................................................................................................................... 0.0076 - 0.1295 mm
Balance Shaft Endplay ............................................................................................................................................................................... 0.04 - 0.18 mm
Rod Length (Centerline Bore-to-Bore) .............................................................................................................................................................. 169.1 mm
Alignment
Bore-to-Bore Max. Twist ............................................................................................................................................................................ ± 0.05 mm
Bore-to-Bore Max. Bend .......................................................................................................................................................................... ± 0.038 mm
Side Play (As Assembled to Crank)
Standard Play .................................................................................................................................................................................... 0.410 ± 0.26 mm
Max Play ...................................................................................................................................................................................................... 0.670 mm
Balancer shaft bearing cap bolts and studs ............................................................................................................................................ 10 Nm (89 inch lbs.)