Excursion 2WD V10-6.8L VIN Z CNG (2003)
16. If equipped, install the EGR valve-to-exhaust manifold tube.
^
Hand-tighten the fittings.
^
Tighten the upper fitting to 50 Nm (37 ft. lbs.).
^
Tighten the lower fitting to 50 Nm (37 ft. lbs.).
17. If equipped, install the EGR transducer bracket.
^
Position the bracket.
^
Install the bolts.
18. If equipped, connect the EGR transducer vacuum lines.
19. If equipped, connect the EGR transducer and the throttle position sensor connectors.