Excursion 2WD V10-6.8L VIN Z CNG (2003)
Air Door Actuator / Motor: Service and Repair
Main Climate Control
Panel/Floor Door
REMOVAL
1. Release the stops and lower the glove compartment door.
2. Remove the panel/floor door.
1
Disconnect the vacuum line.
2
Remove the screws.
3
Rotate the panel floor door to disengage the lever and remove the panel/floor door.
CAUTION: Do not attempt to bend any part of the lever. It is brittle and will break.
INSTALLATION
1. Follow the removal procedure in reverse order.
Panel/Defrost Door
REMOVAL
1. Remove the extension duct.