Excursion 2WD V10-6.8L VIN Z CNG (2003)
2. Place the shaft seal on the special tool. Lubricate the shaft seal and the special tool with PAG oil or equivalent.
3. Position the shaft seal and the special tool over the A/C compressor shaft.
4. Push the shaft seal onto the A/C compressor shaft with the special tool until seated.
5. Install the shaft seal snap ring.
6. Carry out the A/C compressor external leak test. See: Testing and Inspection/Component Tests and General Diagnostics/A/C Compressor -
External Leak Test
