Excursion 2WD V10-6.8L VIN Z CNG (2003)
13. Remove the third row safety belt anchor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt anchor.
14. Pull out where indicated on the second row safety belt guide cover and open.
15. Remove the second row shoulder safety belt guide.
1
Remove the nut.
2
Remove the shoulder safety belt guide.
CAUTION: If the safety belt retractor is to be reused, do not allow the safety belt to be retracted all the way into the retractor. Doing so may
cause the retractor to lock and not release the safety belt.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
