Excursion 2WD V10-6.8L VIN Z CNG (2003)
22. Remove the second row safety belt retractor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the second row safety belt retractor.
Third row retractor only
23. Remove the third row safety belt retractor.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the third row safety belt retractor.
INSTALLATION
Third row retractor only
1. Install the third row safety belt retractor.
1
Position the third row safety belt retractor to the body.
2
Using the special tool 501-010 (T77L-2100-A), install the bolt.
CAUTION: Do not remove the shipping clip until the shoulder safety belt guide is secured in position. Allowing the safety belt to be retracted
further into the safety belt retractor may cause the safety belt retractor to lock and not release the safety belt.
Second row retractor only
2. Install the second row safety belt retractor.
1
Position the second row safety belt retractor to the body.
2
Using the special tool 501-010 (T77L-2100-A), install the bolt.
