Excursion 2WD V10-6.8L VIN Z CNG (2003)
16. NOTE: In order to obtain clearance for the pivot bolt removal when servicing the RH front axle, it may be necessary to raise the side of the
vehicle to relieve the weight on the suspension.
Remove the pivot nut and bolt, and remove the axle.
Installation
1. Inspect the pivot bushing for wear or damage. Replace as necessary.
2. Position the front axle into the pivot bracket and install a new pivot bolt and nut hand-tight.
3. Inspect the radius arm pivot bushing for wear or damage. Replace as necessary.
4. Install a new radius arm-to-axle bolt and nut hand-tight.
5. Install a new radius arm-to-frame bracket pivot bolt and nut. Tight to specification.
