Excursion 2WD V10-6.8L VIN Z CNG (2003)
2. Disconnect the shift cable.
1
Disconnect the shift cable from the manual lever.
2
Disconnect the cable housing from the bracket; position aside.
3. Disconnect the digital Transmission Range (TR) sensor electrical connector.
4. Remove the Digital Transmission (TR) sensor.
1
Remove the bolts.
2
Remove the digital Transmission Range (TR) sensor.
5. NOTE: A No. 53 drill bit (1/16 inch) can be used instead to remove the manual lever shaft retaining pin.
Using the special tool, remove the manual lever shaft retaining pin.